- 3D Printing - Saturn V Skylab with 3D printed parts
This is my build of the Estes Saturn V Skylab I’m posting it in this section because of the 3D printed parts I am a professor at a university in a college of fine arts, and my friend in the art department has access to a nice printer I have made my own 3D models in the past, but this time I
- Propulsion | Rocketry Forum - Model Rocketry Forums
Discussions of motors ranging from single-use black powder motors, composite reloads, hybrids, etc
- Estes Saturn V, Quintuple Cluster, Staged - Rocketry Forum
I have an extra Estes Saturn V Skylab (main body tube is a bit squished), but the Skylab vs Apollo doesn't much matter here What I want to do, because I can (try), is modify it to be a cluster of 5 (probably 18mm), gap cluster them to a second stage with another 5 (also probably 18mm), and stage that to 1 motor in the 3rd stage
- 3D upgrades for Estes Saturn V Skylab - Rocketry Forum
I designed and printed 3D parts for some vintage Estes scale models; parts I couldn't find elsewhere I'm preparing to build the Estes Saturn V Skylab Since this is a newer model, I'm seeing some available parts
- Rocksim not showing a rocket in (Flight Simulation) to launch.
First I am new to rocksim and learning so go easy on me I have an Estes Saturn Skylab file and When I first opened it and added an engine it would show a flight sim with results I wanted to use the Estes F15-4 as advertised by Estes for the rocket I had a launch or two with results but
- Return of the Estes 1:100th scale Saturn V - Rocketry Forum
The ad makes quite a big deal about "Upgraded 29mm Motor Mount" The previous Saturn V and Saturn V Skylab releases featured a 29mm motor mount so I am not sure what is the importance of this mention CATO proof for E12 motors
- Estes Saturn V Skylab - adhesive for wraps | Rocketry Forum - Model . . .
I'm building the Estes Saturn V Skylab The instructions say to use spray adhesive for the wraps I just put on veneer on a murphy bed with liquid adhesive Any thoughts on using a liquid adhesive instead of spray adhesive for the wraps?
- What I did today -instead- of Rocketry.
I took advantage of a short gap between rain showers to rotate tires on the Leaf Now we have another 6K miles before the nag alarm m hits on that again It won’t get me into any NASCAR pits, but I feel pretty good about it taking 30 minutes by myself and with only hand tools Have you bought
|